Error: Cette annonce a été désactivée
Formula Renault F3 F4R 2.0L Dry Sump Parts
For sale I have some F3/Formula Renault Dry Sump parts that I was intending to build onto a 'nice spec' engine for my Clio rally car.
After thinking about it, I've decided to just keep the engine basic and so hence the sale of these parts to fund some other things for the build.
Please note this is not all that is required to just 'bolt on and go'. I'd say from my research of what's involved to fit it theres 75% of the stuff there component wise, including the difficult to source parts. Parts were sold to me 2nd hand in working order but obviously I cannot confirm this as I've never fitted them or run them on the car.
Parts included are as follows:
1x F3 Sump Pan (Undamaged)
1x F3 Sump Pan (Cracked but neatly repaired, TIG Welded - see photo)
2x Baffle Plates - Damaged but easily to replicate.
Pickup Pipe (& P Clip)
Anodized connecting piece (to connect pump to sump pan)
Oil Pump
Smaller Crank Pulley & Bolt (F3)
Smaller Water Pump Pulley (F3)
Sandwich plate (for oil pump pipe)
Water heat exchanger (slightly damaged, small hole easily repairable with a blob of weld/liquid meta - see photo)
Pump/Belt driveshaft (& bushes)
2x Driveshaft pulley/brackets
For more info or pictures please get in touch.
Can post at buyers risk / cost.
£900
After thinking about it, I've decided to just keep the engine basic and so hence the sale of these parts to fund some other things for the build.
Please note this is not all that is required to just 'bolt on and go'. I'd say from my research of what's involved to fit it theres 75% of the stuff there component wise, including the difficult to source parts. Parts were sold to me 2nd hand in working order but obviously I cannot confirm this as I've never fitted them or run them on the car.
Parts included are as follows:
1x F3 Sump Pan (Undamaged)
1x F3 Sump Pan (Cracked but neatly repaired, TIG Welded - see photo)
2x Baffle Plates - Damaged but easily to replicate.
Pickup Pipe (& P Clip)
Anodized connecting piece (to connect pump to sump pan)
Oil Pump
Smaller Crank Pulley & Bolt (F3)
Smaller Water Pump Pulley (F3)
Sandwich plate (for oil pump pipe)
Water heat exchanger (slightly damaged, small hole easily repairable with a blob of weld/liquid meta - see photo)
Pump/Belt driveshaft (& bushes)
2x Driveshaft pulley/brackets
For more info or pictures please get in touch.
Can post at buyers risk / cost.
£900
2020-12-06 18:27:28
ref.1895628
Annonceurs PREMIUM
Le coin des passionnés
Annonceurs PRO
Selection de 10 TOP Annonces
